Aromatherapy machine control panel

Aromatherapy machine control panelFandou TechnologyAroma diffuser humidifier atomizer solution main control chip IC control board PCBA supplyAroma diffuser circuit board_smart aroma diffuser circuit b

  • Model: Aromatherapy machine control panel

Aromatherapy machine control panel


Fandou Technology


Aroma diffuser humidifier atomizer solution main control chip IC control board PCBA supply


Aroma diffuser circuit board_smart aroma diffuser circuit board control board


[Essential oil atomization aromatherapy machine ultrasonic aromatherapy machine circuit control board


Aromatherapy machine PCBA control motherboard parameters detailed description


1. Product voltage: DC24V±5%

2. Product current: 330±30mA (with light), 315±30mA (without light)

3. Product power consumption: 10W

4. Power adapter (using switching power supply) configuration:

Adapter input voltage: 100~240VAC 50/60Hz

Adapter input current: 0.4A max

Adapter output voltage: 24VDC±5%

Adapter load current: 500mA

5. Water level protection:

Atomizing film signal induction water shortage protection (no water automatic shutdown function)

Detailed explanation: When there is no water on the surface of the transducer, the whole machine will automatically shut down within 2 seconds (the atomization will stop at this time, the LED light will be turned off, and the fan will stop); when there is water on the surface of the transducer, the switch must be pressed to turn it on.

6.6. Fan interface specification: DC12V

7. The average amount of fog (ML/h): 50±5ml/h

8. Function

(1) Button function:

Press the first time: continuous spraying, the light is turned on, and the fan rotates;

Press the second time: intermittent spray: 10 seconds ON, 10 seconds OFF

Press the third time: 1 hour timer

Press the fourth time: 2 hours timer

Press the fifth time: shutdown

(2) Light function:

Press the first time: 100% brightness

Press the second time: 50% brightness

Press the third time: 25% brightness

Press the fourth time: turn off the lights


香薰机控制板

香薰机加湿器雾化器方案 主控芯片IC 控制板 PCBA供应

香薰机线路板_智能香薰机线路板控制板

【精油雾化香薰机超声波香薰机电路控制板

香薰机PCBA控制主板参数详细说明

1. 产品使用电压:DC24V±5%


2. 产品使用电流:330±30mA(带灯)、315±30mA(不带灯)


3. 产品功率消耗:10W


4. 电源适配器(采用开关电源)配置:


适配器输入电压:100~240VAC 50/60Hz


适配器输入电流:最大0.4A


适配器输出电压: 24VDC±5%


适配器负载电流:500mA


5.  水位保护:


雾化片信号感应缺水保护 (无水自动关机功能)


详解:当换能片表面没有水后2秒内整机自动关闭(此时停止雾化,LED灯关闭,风机停);当换能片表面有水时此时需按开关键才能开启。


6.  6、风机接口规格:


DC12V


7. 平均成雾量(ML/h):50±5ml/h


8. 功能


(1)按键功能:


按第一次:连续喷雾,灯光打开,风机转动;


按第二次:间歇喷雾:10秒ON ,10秒OFF


按第三次:1小时定时


按第四次:2小时定时


按第五次:关机


(2)灯光功能:


按第一次:100%亮度


按第二次:50%亮度


按第三次:25%亮度


按第四次:关灯


香薰机控制板

香薰机加湿器雾化器方案 主控芯片IC 控制板 PCBA供应

香薰机线路板_智能香薰机线路板控制板

【精油雾化香薰机超声波香薰机电路控制板

香薰机PCBA控制主板参数详细说明

1. 产品使用电压:DC24V±5%


2. 产品使用电流:330±30mA(带灯)、315±30mA(不带灯)


3. 产品功率消耗:10W


4. 电源适配器(采用开关电源)配置:


适配器输入电压:100~240VAC 50/60Hz


适配器输入电流:最大0.4A


适配器输出电压: 24VDC±5%


适配器负载电流:500mA


5.  水位保护:


雾化片信号感应缺水保护 (无水自动关机功能)


详解:当换能片表面没有水后2秒内整机自动关闭(此时停止雾化,LED灯关闭,风机停);当换能片表面有水时此时需按开关键才能开启。


6.  6、风机接口规格:


DC12V


7. 平均成雾量(ML/h):50±5ml/h


8. 功能


(1)按键功能:


按第一次:连续喷雾,灯光打开,风机转动;


按第二次:间歇喷雾:10秒ON ,10秒OFF


按第三次:1小时定时


按第四次:2小时定时


按第五次:关机


(2)灯光功能:


按第一次:100%亮度


按第二次:50%亮度


按第三次:25%亮度


按第四次:关灯


label: PCBA