Connector insert size measurement image detection system

Connector insert size measurement image detection systemTesting requirements:1. Level measurement of metal inserts;2. Positioning size measurement of metal inserts;Hardware solution:1. Industrial came

  • Model: Connector insert size measurement image detection system

Connector insert size measurement image detection system

Connector insert size measurement image detection system

Testing requirements:

1. Level measurement of metal inserts;

2. Positioning size measurement of metal inserts;

Hardware solution:

1. Industrial cameras

A 2 million CMOS industrial camera is selected to collect pictures from the left, right, and top at the same time. If the precision is high, a 5 million pixel camera can be used.

2. FA lens

Choose 50mm focal length, cost-effective computar lens;

3. Industrial light source

Experimental test, choose red coaxial light source, light-emitting area is 50*50mm

Vision software:

The size measurement tool using the self-developed vision system platform Ovision 1.0


检测要求:
1、金属嵌件水平度测量;
2、金属嵌件的定位尺寸测量;
硬件方案:
1、工业相机
选用200万CMOS工业相机,从左、右、上面,三个方位同时采集图片。如果精度要求高,可采用500万像素相机。
2、FA镜头
选用50mm焦距,高性价比computar镜头;
3、工业光源
实验测试,选用红色同轴光源,发光面积是50*50mm
视觉软件:
采用自主开发的视觉系统平台Ovision 1.0的尺寸测量工具

检测要求:
1、金属嵌件水平度测量;
2、金属嵌件的定位尺寸测量;
硬件方案:
1、工业相机
选用200万CMOS工业相机,从左、右、上面,三个方位同时采集图片。如果精度要求高,可采用500万像素相机。
2、FA镜头
选用50mm焦距,高性价比computar镜头;
3、工业光源
实验测试,选用红色同轴光源,发光面积是50*50mm
视觉软件:
采用自主开发的视觉系统平台Ovision 1.0的尺寸测量工具