Yunlaidian community electric car charging station, motherboard accessories, battery car charging station pile 10 main control board

Positive description1. 10-channel independent display, super-bright three-digit digital tube, charging time 1-999 minutes can be set freely.2. 10-way zone start buttons, which do not interfere with ea

  • Model: Yunlaidian community electric car charging station, motherboard accessories, battery car charging station pile 10 main control board

Positive description

1. 10-channel independent display, super-bright three-digit digital tube, charging time 1-999 minutes can be set freely.


2. 10-way zone start buttons, which do not interfere with each other, correspond to the display zone and city to prevent misoperation.


Third, the board surface is simple, and each motherboard is cleaned at the factory, which can effectively prevent the motherboard from whitening, prevent the oxidation of the solder joints, and extend the service life.

Back description

1. The main board green-faced wiring terminals are clearly distinguished, the main power input area, the power distribution output area, the transformer wiring area, the coin acceptor wiring area, and the credit card module wiring area.

    The voice speaker wiring area has its own money receiving area, the wiring terminals are independent, and the regionalization is clear, which effectively prevents the wrong connection between the motherboard and the accessories during maintenance and replacement.


2. The main board adopts Hongfa 3FF original relay, with stable contacts and longer service life (relays processed by Feng OEM, small factory).


      

3. There are no three independent buttons on the green surface of the motherboard, which can set the original functions of the motherboard.

Fourth, the green surface of the motherboard is also simple, and each motherboard is cleaned at the factory, which can effectively prevent whitening, prevent the oxidation of solder joints, and extend the service life.


     

Motherboard instructions:



This machine is a high-intelligence charging station for electric vehicles. The machine has 10 outputs and can charge 10 electric vehicles at the same time; it can realize the functions of coin and card swiping. Coins and swiping cards can display the current number of coin swipes.

You can also display the balance of the card if you swipe the card, and the deduction fee for each swipe is adjustable (0.1-1 yuan); the charging time of the machine can be set as needed, and the different time for three coins can be set, the third and the third The above time is based on the time of the third coin.

This machine has a power-down memory function. If the machine suddenly loses power during the charging process, when the power is turned on again, the time will continue to count as before the power-off.

This machine has the function of detecting whether the output is normal. When the machine is automatically powered on, the machine starts to self-check from the first channel to the 10th channel. If a problem is detected, the channel is locked. , There is no response when swiping the card and pressing the button in this way,

In the charging process, if the output of this channel is faulty (such as: the fuse is burned out, etc.), the channel will be locked, and the LED display of this channel will show the fault. You can unlock this channel by setting the button.

basic skills:  

(1) 10 outputs


 

(2) Display the number of coin and card swipes, and display the credit card balance

(3) The amount of credit card deduction is adjustable

(4) 1-3 coins time adjustable

(5) With power-down memory function

(6) There is a function of automatically detecting whether the output is normal after power-on



(7) The charging port with output problem can be locked to prevent coin-eating phenomenon

(8) There is a detection output function in the charging project, if there is a problem with the output, this way will be locked

(9) Function can be unlocked by setting mode

(10) With overvoltage and overcurrent protection functions

(11) Voice function, using more humane


Five, setting function

   There are three buttons on the back of the circuit board, from top to bottom they are: set button, increase button, decrease button.

   1. Press the setting button: the first line of the LED screen displays "1 1", and the second line shows "x' crowd", which means we press the first coin time, then press the increase key to increase the time. If you don't let time go by sex, you have been Jiaojiao Electronics.


There are three buttons on the back of the circuit board,

   From top to bottom, they are: Set De


      In the same way, press the decrease button to decrease the time, and hold down the decrease button to decrease the time.


 

   2. Press the setting button again: the first line of the LED screen displays "1 2" and the second line displays "xxx" xxx represents the time when we cast the second coin. The setting method is the same as above.

   3. Press the setting button again: the first line of the LEO screen displays "1 3", and the second line displays "xxx". xxx represents the time when we invested the third coin. The setting method is the same as (1)

   4. Press the setting button again, the first line of the LED screen displays "2", and the second line displays "xxx" xxx represents the amount of deduction for one credit card swipe, press the increase button to increase the amount, press the decrease button to decrease the amount, the setting range is 0.1 - 1 Yuan

   5. Press the set button again, the first line of the LED screen displays "3x", the second line displays "xxx", the first and last x plus three xx in the second line, four xxxx represents the total coin, The number of card swiping, you can press the increase button and decrease button at the same time to clear the data

   6.Press the set button again, the pause number on the LED screen does not flash, and the display is divided into several situations:

       (1) The LED screen displays "one", which means there is no charging in this way.


       (2) The LED screen displays "xxx". The xxx number indicates the remaining time of this way of charging. At this time, press the corresponding button on the front to clear the remaining time of this way, turn off the output, and the LED screen displays "——"

       (3) The LED screen displays —E—indicating that there is a problem with this output and it is locked. At this time, press the corresponding button on the front to unlock this channel, and the LED screen displays "

   7. Press again to exit the setting mode and return to the normal display mode.

6. Power-on self-check function



   When the machine is connected to the power supply, the machine starts to check whether the output is normal from the first line. If there is a problem with the output, this line will display "—E—", this line is locked, and there is no response to coin-inserting buttons. It can be unlocked by setting mode.

Seven, charging process

When the machine is connected to the power supply, it will automatically detect whether it is normal from the first channel. If there is a problem with the output, the channel will be locked, and the LED screen will display an error code; after the detection is completed, the LED screen power will start to flash "—xx", xx represents the first channel ; Then you can

    Set the time through the setting button on the back of the machine, you can also directly insert coins (the first line after coin insertion displays the current number of credit card drinks), swipe card (the first line of credit card displays the current number of coin credit card drinks, the second line Show the remaining collar of the card),

Press the corresponding button to start charging; if during the charging process, the output is damaged (such as: fuse surround, etc.), this will turn off the output, lock the channel, 1ED displays an error code; the locked charging port can be passed through Set the mode to unlock.