ESP8266 NODEMCU with 0.96 OLED extended temperature and humidity development board wifi

ESP8266 NODEMCU with 0.96 OLED extended temperature and humidity development board wifi ESP8266 NODEMCU with 0.96 OLED extended temperature and humidity development board weather station wIFI attack T

  • Model: ESP8266 NODEMCU with 0.96 OLED extended temperature and humidity development board wifi

ESP8266 NODEMCU with 0.96 OLED extended temperature and humidity development board wifi 


ESP8266 NODEMCU with 0.96 OLED extended temperature and humidity development board weather station wIFI attack

 

The design concept is derived from the open source project NodeMCU. The development board integrates 18650 charge and discharge system, with its own charge and discharge protection, and integrates an OLED and five-way button for easy development. 
        This baby operation is consistent with the NodeMCU, adding a programmable LED that can be controlled with GPIO16 to display the operating status of the 8266. Integrated OLED and five-way buttons, more convenient to develop 
five-way buttons. FLA, RSET, D5, D6, D7 control 
OLED SDA and SCL are connected to D1 and D2 respectively.
5 digital pins can be configured separately for write/read/interrupt/pwm/I2C/one-wire supported 
1 AD input 
integrated 18650 battery charge and discharge system 
Micro USB input 
Arduino compatible 
NodeMCU compatible 
wide voltage input range 5V~12V 
1 switch Can control whether the 18650 is powered by 
1 programmable LED (D0) 
charging protection 
discharge protection
 
 Please do not burn the program during charging. When you burn the program, please unplug the battery and confirm that the switch is in the ON position. 

Note: This product does not contain 18650 battery. It can not be reversed when installing the battery, otherwise it will burn the charging chip. !
 
 Charging is recommended to use 5V500MA charger for charging, 5V1A above will have a fever, does not affect the normal work, but do not touch the charging chip or carry it during the charging process, the charging chip and diode will rise to about 60 degrees during the actual charging, normal work It will not heat up and be carried with confidence.